产品功能
Give any robot eyes with the iPhone you already have.
Robot Eyes turns an iPhone Pro into a robot's camera and a dataset recorder at the same time, from one camera session,
so the live stream and the saved recording share one clock and one frame counter.
RECORD
• Color video (HEVC), LiDAR depth and confidence maps, accelerometer and gyroscope, and the camera's position and
orientation from ARKit, with per-frame camera intrinsics.
• The open Stray Scanner dataset layout, readable by existing tools, plus a session.json that summarizes rates,
thermal state, battery and completeness.
• Crash-safe fragmented video, a clear Complete / Incomplete state for every session, Keep pins, bulk Select ▸ Delete,
and Share with real progress and a Cancel that works.
STREAM
• Live camera over the USB cable in the Mobcam wire format (the one Moblin uses), 15 fps by default, adapting to heat.
• A once-a-second status message: frame rates, thermal, battery, free storage, camera tilt, and optionally the camera's
position, heading and speed at 5 to 15 Hz.
• A small HTTP file server for the measurement files, so a computer can grade a run seconds after it ends.
• Your computer may start and stop recordings, if you allow it.
• A ROS 2 camera adapter (Humble and Jazzy) publishes Image and CameraInfo, with checkerboard calibration support.
• Wi-Fi is off by default. Turn it on and receivers must present the access token shown in Settings.
MADE FOR THE BENCH
• Every screen carries a one-word label, so "be on the Record view" is a checkable instruction.
• A heads-up display in words, not icons: what the stream is doing, what the disk is doing, what to do next.
• Presets for a general recorder and for the Robo Bump Truck, the RC truck this app was built to drive.
PRIVACY
• No account, no analytics, no ads, no third-party code. Nothing leaves the phone unless you connect a receiver or
tap Share. Support: rooneytech.pages.dev/robot-eyes
REQUIRES
• An iPhone with a LiDAR scanner (iPhone 12 Pro and later Pro models) and iOS 18.6 or newer.
Robot Eyes is built on the open-source Stray Scanner recorder (MIT). Source and the ROS adapter:
github.com/12mv2/robo-bump-truck-ros
分享「」体验,参与「」抽奖!
分享 1~3 张你对这个产品最满意的截图或效果图
分享「」体验,参与「」抽奖!
用你的故事点亮社区✨!你的真实体验,将会永久展示在 官方主页 📌,为其他朋友提供宝贵参考 💡。立即分享吧!🚀
请为产品评分
请选择问题回答,为大家提供宝贵参考
选择要回答的问题
温馨提示
你尚未上传产品截图。
上传截图可立即获得宝石积分奖励!
如果你赶时间,也可稍后修改评论,补上截图领取宝石。
温馨提醒
你尚未添加产品截图
⚠️ 不添加截图将降低抽奖权重
感谢参加,你已成功参加!
为了确保你能及时收到审核结果和领奖码通知
扫描二维码关注 Mergeek 公众号
在后台回复 「获奖通知」
完成上述操作,即可保障奖励发放成功
+100宝石
用户评价
立即分享产品体验
你的真实体验,为其他用户提供宝贵参考
💎 分享获得宝石
【分享体验 · 获得宝石 · 增加抽奖机会】
将你的产品体验分享给更多人,获得更多宝石奖励!
💎 宝石奖励
每当有用户点击你分享的体验链接并点赞"对我有用",你将获得:
🔗 如何分享
复制下方专属链接,分享到社交媒体、群聊或好友:
💡 小贴士
分享时可以添加你的个人推荐语,让更多人了解这款产品的优点!
示例分享文案:
"推荐一款我最近体验过的应用,界面设计很精美,功能也很实用。有兴趣的朋友可以看看我的详细体验评价~"
关注 Mergeek 公众号
领奖遇到问题?联系小门助手