Dashmazing

Dashmazing shows you real-time engine information in customisable dashboards.
List of available parameters:
- Engine Coolant Temperature
- Engine Oil Temperature
- Intake Air Temperature
- Catalyst Temperature
- Ambient Temperature
- Boost Pressure
- Torque
- Power
- Fuel Rate
- Calculated Fuel Consumption
- Fuel Tank Level
- Fuel Pressure
- Air-Fuel Ratio
- Engine Load
- Air Flow Rate
- Exhaust Flow Rate
- Throttle Position
- Ignition Timing
- Battery Voltage
These are commonly supported, although some cars may not support every single one of these parameters.
You require a car that supports OBD 2, which most cars do, since car manufactures are legally required to support OBD 2 in all major regions of the world for emission regulation purposes. It is recommended to check if you car supports OBD 2 anyways, especially if it is not a new car, as the dates of when OBD 2 was made mandatory range from 1996 to 2006 depending on the vehicle type and region.
For Dashmazing to be able to communicate with your vehicle you also require an OBD 2 Adapter using Bluetooth LE with iOS support. There are many different options available. Dashmazing works with the ELM327 command set, which is the de facto standard, but be sure to check if your OBD 2 Bluetooth Adapter also uses it.
Once you have connected to an adapter once, Dashmazing will remember it and automatically reconnects to it everytime you open the app.
In case you have any issues with connecting to your adapter, please contact the support email address.

To use the app you will have to accept the following disclaimer:
This app provides real-time vehicle data via a connected OBD adapter. It is designed solely for informational and educational purposes.
By using this app, you agree to the following terms:
1. Do not interact with the app while operating a vehicle. Doing so may violate traffic laws and compromise your safety.
2. Data is retrieved via the standard OBD-II protocol. Due to variations in vehicle systems and adapter quality, the app may display incomplete, delayed, or inaccurate information. It is not a substitute for professional diagnostics or servicing.
3. This app supports various third-party OBD-II adapters. The developer is not affiliated with any hardware manufacturer and assumes no responsibility for malfunctions, incompatibility, or damage resulting from their use.
4. The developer shall not be held liable for any direct, indirect, incidental, or consequential damages, including but not limited to loss, injury, or property damage arising from the use or misuse of this app or connected hardware.